modifications in the sense of technical progress are reserved designed by: klaus mueller approved by: rudi rippl date : 2002-05-24 page 1 of 1 [vrrp-02.doc] revision / rev. no.: 00 revised by: approved by: date : reed relay: SIL05-1B72-71D headquarter europe meder electronic ag friedrich-list strasse 6 d-78234 engen-welschingen tel.: +49(0)7733-9487-0 fax: +49(0)7733-9487-32 email: info@meder.com internet: www.meder.com headquarter usa meder electronic inc. 766 falmouth rd mashpee, ma 02649 phone: +1/ 508-539-0002 fax: +1/ 508-539-4088 email: salesusa@meder.com part number: 3305072171 dimensions (tolerance 0,1mm) layout 71d/ pitch 2,54 / top view marking type -layout production -code- en60062 coil/relay characteristics conditions at 20c min. typ. max. units coil resistance 450 500 550 nominal voltage 5,0 vdc nominal rated power 50 mw thermal resistance 110 k / w operate voltage 3,5 vdc release voltage 0,75 vdc return voltage 6,5 vdc contact data x (form x/ dry ) contact rating any combination of the switching voltage and current must not exceed the given rated power 15 w switching voltage dc or peak ac 200 v switching current dc or peak ac 1,0 a carry current dc or peak ac 1,25 a static contact resistance (initial) measured with nominal voltage 150 m insulation resistance rh 45% 10 10 breakdown voltage 250 vdc operate time, including bounce measured with nominal voltage 0,5 ms release time measured with no coil suppression 0,1 ms capacitance 0,3 pf environmental data insulation resistance coil to contact rh 45% 10 11 dielectric strength coil to contact 1,5 kv ac shock ? sine wave, duration 11ms 150 g vibration from 10 - 2000 hz 10 g operating temperature 10c/min max. allowable -20 70 c storage temperature 10c/min max. allowable -35 95 c soldering temperature 5 sec. at 260 c cleaning fully sealed material of case mineral-filled epoxy material of pins feni-alloy tinned
|
